Clean Energy,
Smarter Future
At the center of a world where environment and technology coexist in harmony stands Hansung Enertech.
Contact Us
At the center of a world where environment and technology coexist in harmony stands Hansung Enertech.
Contact Us
EC팬적용, 소음기 타입(CN)
| Category | Item | Unit | 25878310 (HS-07CN) | 25878316 (HS-12CN) |
|---|---|---|---|---|
| General | Type | - | Horizontal / Built-in Ventilation Fan | Horizontal / Built-in Ventilation Fan |
| SIZE | Length (D) | mm | 3300 | 3600 |
| SIZE | Width (W) | mm | 1300 | 1500 |
| SIZE | Height (H) | mm | 1950 | 2500 |
| Supply Fan | Type | - | Axial / Direct Drive | Axial / Direct Drive |
| Supply Fan | Rated Airflow | m³/min | 116 | 200 |
| Supply Fan | Airflow Range | m³/min | 105~127 | 170~230 |
| Supply Fan | Static Pressure | Pa | 150 | 250 |
| Supply Fan | Motor Type | - | EC | EC |
| Supply Fan | Motor Power | kW | 3 | 5 |
| Supply Fan | Quantity | unit/set | 1 | 1 |
| Exhaust Fan | Type | - | Axial / Direct Drive | Axial / Direct Drive |
| Exhaust Fan | Rated Airflow | m³/min | 116 | 200 |
| Exhaust Fan | Airflow Range | m³/min | 105~120 | 170~230 |
| Exhaust Fan | Static Pressure | Pa | 200 | 200 |
| Exhaust Fan | Motor Type | - | EC | EC |
| Exhaust Fan | Motor Power | kW | 3 | 5 |
| Exhaust Fan | Quantity | unit/set | 1 | 1 |
| Thermal Capacity | Cooling | kW | 35 | 52 |
| Thermal Capacity | Heating | kW | 35 | 52 |
| Electric Heater | Capacity | kW | 7 | 7 |
| Chilled Water | Flow Rate | LPM | 150 | 150 |
| Chilled Water | Temperature | °C | 7→12 (Δ5°C) | 7→12 (Δ5°C) |
| Hot Water | Flow Rate | LPM | 150 | 150 |
| Hot Water | Temperature | °C | 60→55 (Δ5°C) | 60→55 (Δ5°C) |
| Silencer | Installation | - | SA side / EA side | SA side / EA side |
| Filter | Specification | - | PRE (Type 3) / High Efficiency (Type 2) | PRE (Type 3) / High Efficiency (Type 2) |
| Power Supply | Phase | - | 3 Phase | 3 Phase |
| Operating Voltage | Voltage | V | 380 | 380 |
Copyright ⓒ 2025. All Rights Reserved.
Through the privacy policy, the company informs you of the purpose and method of use of the personal information you provide, and what measures are being taken to protect your personal information.
- Self-identification, real name verification, confirmation of subscription intent, use of age
- restricted services according to service use
- Contract performance regarding service provision and fee settlement, content provision, purchase and fee payment, product delivery or sending of invoices, etc.
- Delivery of notices, securing communication channels for complaint handling, securing accurate delivery information when delivering products
- Information for providing the latest information such as new services and providing personalized services
- Other smooth provision of high-quality services, etc.
- Name, company name, email, address, contact information, mobile phone number, inquiry content, and other optional items
- In principle, personal information is destroyed without delay upon achieving the purpose of collection or provision.
- However, in order to provide smooth service consultation, the contents may be retained for 3 months after the consultation is completed, and in cases where preservation is required by other laws such as the Act on Consumer Protection in Electronic Commerce, the information will be retained for a certain period of time.
In principle, the company destroys the relevant information without delay after the purpose of collecting and using personal information has been achieved. The information you entered for membership registration, etc. is transferred to a separate DB (separate file in the case of paper) after the purpose has been achieved, and stored for a certain period of time according to internal policies and other relevant laws and regulations for information protection reasons (see retention and use period) and then destroyed. Personal information transferred to a separate DB will not be used for any other purpose than that for which it is retained, unless required by law. Personal information stored in electronic file format is deleted using a technical method that makes it impossible to reproduce the record.
